Skip to main content
This section is included in your selections.

A. Calculations for Determining Maximum Density, Where Expressed in Dwelling Units Per Acre. The entire site area may be used in the calculation of the maximum allowed residential density.

B. How to Calculate Density. Maximum density for an individual site shall be calculated by multiplying the site area (in acres) by the maximum dwelling units/acre in the applicable zone. When calculation results in a fraction, the fraction shall be rounded to the nearest whole number as follows:

1. Fractions of 0.50 and above are rounded up.

2. Fractions below 0.50 are rounded down. (Ord. 1190-21 § 2, 2021).